Waste Bin – Tip Up Bins

The Tip Up Bins manufactured by East West Engineering are designed to tip automatically when the release lever is activated by the seated Forklift driver via a draw rope. Because the bin centre of gravity is forward of the pivot, the bin will always tip forward. The impact of the tipping action on the Forklift mast is eliminated by the use of a heavy-duty shock absorber.
There are three types of Tip Up Bins, the type TU, JTU and NTU Bins. All bins are offered with the following options; Galvanised lids, cast iron, rubber fixed or swivel wheels, drain cock and strainer and crane lugs. The type JTU-18 Bin offers a plastic lid option instead of the galvanised type. The SWL of the Tipping Bin range is 1000kg at a load centre of 1000mm. Standard finish of all East West Engineering Tip Up Bins is Hot Dipped Galvanised.
Forklift attachments are designed in accordance with AS 2359.1 where relevant. The uses of specific forklift attachments should also be in conformance with the statutory regulations that are relevant at the time of design registration.
The use of these attachments are restricted to the purpose for which they are designed. EAST WEST ENGINEERING is not liable if this restriction is breached.
Some attachments are manufactured as “Specials” from this standard product. In this situation, design changes may alter the operating procedures for this Special attachment. If your product type begins with the prefix “J”, it will be a special. Please check with East West Engineering for non-standard instructions specific for your attachment.